ROTEADOR HP 2011

HP>
HP> dir      ------------------------------------    ( Verificando memoria flash )
HP>reboot    ----------------------------------    ( Reinicializar  o router )
HP>delete startup.cfg -----------------------   ( Apagar o arquivo de configuração )
HP> system-view     -------------------------    ( Modo de configuração  )
[HP]display saved-configuration -----------       ( Mostra a configuração que estava salva )
[HP]display ip interface brief  --------------       ( Mostra um resumo das interfaces )
[HP]display interface Ethernet 0/0 ---------      ( Mostra o status e configuração da interface )
[HP]display current-configuration ---------      ( Mostra a configuração que está rodando )

 ******************************************************************************
    Configuração da interface Ethernet (WAN)

[HP]
[HP]interface Ethernet0/1
[HP-Ethernet0/1] port link-mode route 
[HP-Ethernet0/1] ip address 192.168.0.2 30
[HP-Ethernet0/1] undo shutdown
[HP-Ethernet0/1] quit 
[HP]

*******************************************************************************
   
    Configuração da interface Ethernet (LAN)

[HP]
[HP]interface Ethernet0/0
[HP-Ethernet0/0] port link-mode route 
[HP-Ethernet0/0] ip address 10.0.0.1 24
[HP-Ethernet0/0] undo shutdown
[HP-Ethernet0/0] quit 
[HP]


********************************************************************************

    Configuração da interface Loopback 

[HP]
[HP]interface loopback 0
[HP-Loopback 0] ip address 189.0.0.1 32
[HP-Loopback 0] ip address 10.0.0.1 24
[HP-Loopback 0] quit 
[HP]

*********************************************************************************

   Configuração da rota default 

[HP]
[HP] ip route-static 0.0.0.0 0.0.0.0 192.168.0.1
[HP]

*********************************************************************************
    Habilitar o servidor de Telnet

[HP]
[HP] telnet server enable
[HP]

*********************************************************************************

  Habilitar o serviço Telnet e a autorização para o usuário local

[HP]

[HP]local-user admin

[HP-luser-admin] password cipher admin

[HP-luser-admin] authorization-attribute level 3

[HP-luser-admin] service-type telnet 

[HP-luser-admin] quit 

[HP]

*********************************************************************************

Aplicar a interface de usuário (permitir acesso Telnet com o usuário admin).

[HP]

[HP] user-interface vty 0  4

[HP-ui-vty0-4]authentication-mode scheme 

[HP-ui-vty0-4]quit

[HP]

*********************************************************************************

Ping extendido:

[HP]ping -s 1500 -c 10 192.168.0.1

*********************************************************************************

Configurando a interface serial (WAN):

[HP]

[HP]interface Serial0/0

[HP-Serial0/0] link-protocol ppp

[HP-Serial0/0] ip address 192.168.0.2 30

[HP-Serial0/0] undo shutdown

[HP-Serial0/0] quit 

[HP]

*********************************************************************************