LP - DDR

terça-feira, 23 de outubro de 2018

SCRIPT BASICO HUAWEI AR 2220 PRAPS

system-view
aaa
local-user admin password cipher Admin@huawei
local-user admin privilege level 15
local-user admin service-type telnet ssh
!
user-interface con 0
authentication-mode password
set authentication password cipher Admin@huawei
!
user-interface vty 0 4
authentication-mode aaa
!
interface GigabitEthernet0/0/0
description Interface_LAN
ip address 192.168.1.1 255.255.255.0
undo shut
#
interface GigabitEthernet0/0/1
description Interface_WAN
ip address 187.51.221.150 255.255.255.252
undo shut
#
ip route-static 0.0.0.0 0 187.51.221.149

Configurando com vlan

system-view
aaa
local-user admin password cipher Admin@huawei
local-user admin privilege level 15
local-user admin service-type telnet ssh
!
user-interface con 0
authentication-mode password
set authentication password cipher Admin@huawei
!
user-interface vty 0 4
authentication-mode aaa
!
interface GigabitEthernet0/0/0
description Interface_LAN
ip address 192.168.1.1 255.255.255.0
undo shut
#
interface GigabitEthernet0/0/1.XX
dot1q termination vid XX
ip address 187.51.221.150 255.255.255.252
#
interface GigabitEthernet0/0/1
undo ip address
#
ip route-static 0.0.0.0 0 187.51.221.149

SCRIPT BASICO HUAWEI AR 1220 PRAPS

system-view

aaa
local-user admin password cipher Admin@huawei
local-user admin privilege level 15
local-user admin service-type telnet
#
telnet server enable
#
user-interface vty 0 4
authentication-mode aaa
#
interface GigabitEthernet0/0/0
description Interface_LAN
ip address 192.168.1.1 255.255.255.0
undo shut
#
interface GigabitEthernet0/0/1
description Interface_WAN
ip address 187.51.221.150 255.255.255.252
undo shut
#
ip route-static 0.0.0.0 0 187.51.221.149

configurando com vlan

system-view

aaa
local-user admin password cipher Admin@huawei
local-user admin privilege level 15
local-user admin service-type telnet
#
telnet server enable
#
user-interface vty 0 4
authentication-mode aaa
#
interface GigabitEthernet0/0/0
description Interface_LAN
ip address 192.168.1.1 255.255.255.0
undo shut
#
interface GigabitEthernet0/0/1.XX
dot1q termination vid XX
ip address 187.51.221.150 255.255.255.252
#
interface GigabitEthernet0/0/1
undo ip address
#
ip route-static 0.0.0.0 0 187.51.221.149

quinta-feira, 11 de outubro de 2018

ROUTER 121R

SCRIPT

telnet server enable
#
aaa
local-user admin privilege level 15
local-user admin service-type telnet terminal ssh http
#
interface GigabitEthernet 0/0/0
undo portswitch
descripition interfacel_Lan
ip address 189.108.181.254 255.255.255.252
#
ip route-static 0.0.0.0 0.0.0.0 187.93.194.253
#
interface loopback0
ip address 186.238.166.185 255.255.255.255
#
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return

ROUTER HP-954

SCRIPT

system view

local-user admin class manage
service-type telnet
password simple admin
authorization-attribute user-role level-3
authorization-attribute user-role network-admin
authorization-attribute user-role network-operator
quit
telnet server enable

line vty 0 4
authentication-mode scheme
user-role network-admin
user-role network-operator
quit

interface giga 0/1
port link-mode route
ip address 200.100.100.2 255.255.255.252
undo shutdown
quit

ip route-static 0.0.0.0 0.0.0.0 201.201.201.201

interface loopback0
ip address 200.100.100.2 255.255.255.255
quit

sexta-feira, 29 de dezembro de 2017

ROTEADOR AR162F

AR162 F

SCRIPT

Press any key to get started

Username: admin

Password: Admin@huawei

Warning: Auto-Config is working. Before configuring the device, stop Auto-Config. If you perform configurations when Auto-Config is running, the DHCP, routing, DNS, and VTY configurations will be lost. Do you want to stop Auto-Config? [y/n]:n

Script básico Praps:

telnet server enable

aaa

local-user admin privilege level 15

local-user admin service-type telnet terminal ssh http

interface GigabitEthernet 0/0/4

description interface_WAN

ip address 201.200.150.126 255.255.255.252

interface GigabitEthernet 0/0/0

description interface_LAN

undo portswitch

ip address 189.108.181.254 255.255.255.252

ip route-static 0.0.0.0 0.0.0.0 201.200.150.125

user-interface vty 0 4

authentication-mode aaa

user privilege level 15

Return

Obs: a senha de acesso telnet e a senha default (user: admin password: Admin@huawei).

Script básico serial (V35):

telnet server enable

aaa

local-user admin privilege level 15

local-user admin service-type telnet terminal ssh http

interface Serial0/0/0

link-protocol ppp

ip address 201.200.150.126 255.255.255.252

interface GigabitEthernet 0/0/0

undo portswitch

ip address 189.108.181.254 255.255.255.252

ip route-static 0.0.0.0 0.0.0.0 201.200.150.125

user-interface vty 0 4

authentication-mode aaa

user privilege level 15

Return

Obs: a senha de acesso telnet é a senha default (user: admin password: Admin@huawei).

Script básico Frame-Relay:

telnet server enable

aaa

local-user admin privilege level 15

local-user admin service-type telnet terminal ssh http

interface Serial0/0/0

link-protocol fr

fr lmi type q933a

interface Serial0/0/0.16 p2p

description interface_WAN_Cliente

fr dlci 16

ip address 192.168.0.2 255.255.255.252

interface Serial0/0/0.400 p2p

description interface_WAN_Gerencia

fr dlci 400

ip address 179.179.179.25 255.255.255.192

interface GigabitEthernet 0/0/0

description interface_LAN

undo portswitch

ip address 10.10.18.1 255.255.255.0

ip route-static 0.0.0.0 0.0.0.0 Serial0/0/0.16

ip route-static 179.179.179.1 255.255.255.255 Serial0/0/0.400

user-interface vty 0 4

authentication-mode aaa

user privilege level 15

return

Obs: a senha de acesso telnet é a senha default (user: admin password: Admin@huawei).

Script básico Multilink PPP:

telnet server enable

aaa

local-user admin privilege level 15

local-user admin service-type telnet terminal ssh http

interface Serial0/0/0

undo ip address

link-protocol ppp

ppp mp Virtual-Template 1

virtualbaudrate 2048000

interface Virtual-Template1

ip address 192.168.0.2 255.255.255.252

interface GigabitEthernet 0/0/0

undo portswitch

ip address 10.101.10.1 255.255.255.0

ip route-static 0.0.0.0 0.0.0.0 192.168.0.1

user-interface vty 0 4

authentication-mode aaa

user privilege level 15

Return

Obs: a senha de acessso telnet é a senha default (user: admin password: Admin@huawei).

Salvando as configurações:

[Huawei] save

The current configuration will be written to the device.

Are you sure to continue?[Y/N]: y

It will take several minutes to save configuration file, please wait...............................

Configuration file had been saved successfully

Note: The configuration file will take effect after being activated

[Huawei]

Deletando as configurações:

reset saved-configuration

This will delete the configuration in the flash memory.

The device configurations will be erased to reconfigure.

Are you sure? (y/n)[n]: y .....

Info: Clear the configuration in the device successfully.

reboot

Info: The system is comparing the configuration, please wait.

Warning: All the configuration will be saved to the next startup configuration. Continue? [y/n]: n

System will reboot! Continue? [y/n]: y

Info: system is rebooting, please wait...

Recuperando a senha:

Reinicie e aperte Ctrl+B para interromper o boot.

Senha default= Admin@huawei

Press Ctrl+B to break auto startup ... 3

Enter Password: Admin@huawei

Default Password,Please Set New Password.

Main Menu

1. Default Startup

2. Serial Menu

3. Network Menu

4. Startup Select

5. File Manager

6. Reboot

7. Password Manager

Enter your choice(1-7): 7

PassWord Menu

1. Modify the menu password

2. Clear the console login password

0. Return

Enter your choice(0-2): 2

Clear the console login password Succeed!

PassWord Menu

1. Modify the menu password

2. Clear the console login password

0. Return

Enter your choice(0-2): 0

Main Menu

1. Default Startup

2. Serial Menu

3. Network Menu

4. Startup Select

5. File Manager

6. Reboot

7. Password Manager

Enter your choice(1-7): 6

ROTEADOR HP-MSR-1002

HP – MSR 1002

GUIA RÁPIDO

SCRIPT ROUTER 1002

system-view

telnet server enable

scheduler logfile size 16

password-recovery enable

interface LoopBack0

ip address 172.18.225.61 32

quit

interface Gigabitethernet0/0

description interface_Lan
port link-mode route

ip address 10.198.247.129 25

quit

interface Gigabitethernet0/1

description interface_Wan
port link-mode route

ip address 172.18.214.70 30

quit

line class vty

user-role network-admin

user-role network-operator

quit

line vty 0 4

authentication-mode scheme

user-role network-admin

quit

ip route-static 0.0.0.0 0 172.18.208.125

local-user admin class manage

password simple admin

service-type telnet terminal

authorization-attribute user-role level-3

authorization-attribute user-role network-admin

quit

line class aux

user-role network-admin

quit

line class tty

user-role network-operator

quit

line class vty

user-role network-admin

user-role network-operator

quit

line aux 0

user-role network-admin

quit

line vty 0 4

authentication-mode scheme

user-role network-admin

user-role network-operator

quit

line vty 5 63

user-role network-operator

save

domingo, 15 de janeiro de 2017

ROTEADORES CISCO

CONFIGURAÇÃO DE ROTEADORES CISCO

Vamos aos primeiros passos para configurar um roteador Cisco

Comandos Root

show = Examina o status do roteador

configure = Altera a configuração

no = Nega o parâmetro configurado

copy = Torna a configuração efetiva

Modos de Comando

Router> ------------------------- Modo usuário
Router# ---------------------------Modo privilegiado

Router(config)# --------- ---------Modo de configuração global

Router(config-if)#--------- -------Modo de configuração da Interface

Router(config-subif)#------------- Modo de configuração da subinterface

Vamos ver como fica estes comandos no roteador Cisco

Ao Ligar o roteador Cisco aparecera varias informações como a versão a série e etc ...

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.

Processor board ID FTX0947Z18E

M860 processor: part number 0, mask 49

2 FastEthernet/IEEE 802.3 interface(s)

191K bytes of NVRAM.

63488K bytes of ATA CompactFlash (Read/Write)

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 18-Jul-07 04:52 by pt_team

--- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.

Self decompressing the image :

########################################################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 18-Jul-07 04:52 by pt_team

Image text-base: 0x60080608, data-base: 0x6270CD50

This product contains cryptographic features and is subject to United