CONFIGURAÇÃO MODEM DATACOM EFM

                     DATACOM EFM 



# Datacom Login: admin
# Password:         admin



Obs: Entra no modo de configuração.

Datacom_2290# configure
Datacom_2290(config)#

- Alterar os itens em negrito/vermelho com os dados da LP e colar no modem.

- Com Script não precisa entrar no modo de configuração ok 
- apenas coloque o Script 

Datacom_2290# 

Script 

conf
ip snmp-server community modemEFM ro
ip snmp-server community modemEFM rw
ip snmp-server
ip snmp-server contact vivo
ip snmp-server location cliente
interface g.shdsl 1
group members 1 2 3 4
exit
interface ethernet 1
switchport native vlan 10
no shutdown
exit
interface vlan 10
set-member tagged g.shdsl 1
set-member untagged ethernet 1
no shutdown
exit
interface mgmt g.shdsl
vlan 100
ip address 10.118.185.211/25
no shutdown
exit
ip route 0.0.0.0/0 10.118.185.1
hostname Datacom_dm2290
exit
Datacom_2290# copy running-config startup-config   Salvar as configurações

reboot

 – Interface g.shdsl

- Verificando o sincronismo, a margem sinal/ruído (SNR) e a atenuação de todas as portas:
Datacom# show interface g.shdsl 1 port all
Id Operation Annex Data Rate Link Status   SNR     Loop Atn                                                 
-----------------------------------------------------------------------------
1 Enabled Auto   1024  kbps Sync     OK    19 dB      24 dB     SINCRONIZADO
2 Enabled Auto -           kbps Down -               dB -         dB     SEM SINCRONISMO
3 Enabled Auto   1024  kbps Sync     OK    19 dB      24 dB     SINCRONIZADO
4 Enabled Auto -           kbps Down            -    dB -         dB     SEM SINCRONISMO


- Verificando a taxa de erro nas portas g.shdsl:

Datacom# show interface g.shdsl 1 counters perf-summary
**************************************
* Current interval, up to 15 minutes *
**************************************
| ES| SES | CRC | LOSW | UAS |
Port 1 | 0 | 0 | 0 | 0 | 0 |
Port 2 | 0 | 0 | 0 | 0 | 0 |
Port 3 | 0 | 0 | 0 | 0 | 0 |
Port 4 | 0 | 0 | 0 | 0 | 0 |
****************
* Last 8 hours *
****************
| ES | SES | CRC | LOSW | UAS |
Port 1 | 0 | 0 | 0 | 0 | 0 |
Port 2 | 0 | 0 | 0 | 0 | 0 |
Port 3 | 0 | 0 | 0 | 0 | 0 |
Port 4 | 0 | 0 | 0 | 0 | 0 |
************************************
* Current interval, up to 24 hours *
************************************
| ES | SES | CRC | LOSW | UAS |
Port 1 | 0 | 0 | 0 | 0 | 0 |
Port 2 | 0 | 0 | 0 | 0 | 0 |
Port 3 | 0 | 0 | 0 | 0 | 0 |
Port 4 | 0 | 0 | 0 | 0 | 0 |
*************
* Last Week *
*************
| ES | SES | CRC | LOSW | UAS |
Port 1 | 0 | 0 | 0 | 0 | 0 |
Port 2 | 0 | 0 | 0 | 0 | 0 |
Port 3 | 0 | 0 | 0 | 0 | 0 |
Port 4 | 0 | 0 | 0 | 0 | 0 |

- Zerando os contadores da interface g-shdsl:

Datacom#

Datacom# clear interface counters g.shdsl 1 port all

- Voltando as configurações de fabrica (Default):

Datacom_2290# erase startup-config
Datacom_2290# reboot

Save current configuration ?
-[Y]es
-[N]o
-[C]ancel (default)
Choice: n

Restarting system.


4.1. – Interface g.shdsl



- Verificando o sincronismo, a margem sinal/ruído (SNR) e a atenuação de todas as portas:





Datacom# show interface g.shdsl 1 port all

- Verificando o sincronismo, a margem sinal/ruído (SNR) e a atenuação por porta:



Datacom_2290# show interface g.shdsl 1 port 1

- Verificando a taxa de erro nas portas g.shdsl:
Datacom# show interface g.shdsl 1 counters perf-summary

Datacom# clear interface counters g.shdsl 1 port all